Тип публикации: статья из журнала
Год издания: 2023
Идентификатор DOI: 10.21883/tpl.2023.05.56034.19541
Аннотация: <jats:p> The design of a 10th-order waveguide bandpass filter with an additional inductive cross-coupling between non-adjacent resonators has been proposed and studied. An inductive coupling is formed by a U-shaped conductor structure with grounded ends that is formed in the filter cover. This method of cross-coupling organization Показать полностьюensures not only the temperature stability of the characteristics, but also the manufacturability of the structure. The high selectivity of the device is achieved by both the attenuation poles located near the passband, as well as the level of suppression in the stopbands, exceeding 120 dB. The passband loss of the fabricated filter is ~ 0.8 dB at its central frequency f<jats:sub>0</jats:sub>=18.2 GHz and relative bandwidth Delta f/f<jats:sub>0</jats:sub>=1.5%. The small dimensions (135x 30x 10 mm) and the weight of about 200 g of the device, with simultaneously high electrical characteristics show the promise of its use, for example, in on-board and ground-based space communication systems Keywords: bandpass filter, waveguide, resonator, cross-coupling. </jats:p>
Журнал: Technical Physics Letters
Выпуск журнала: Т. 49, № 5
Номера страниц: 72
ISSN журнала: 10637850
Место издания: Saint-Petersburg
Издатель: Физико-технический институт им. А.Ф. Иоффе РАН